|
|
Samarium Cobalt Stock
Sintered
SmCo Rectangular Magnets
|
Sintered
SmCo Rectangular Magnets
|
| Item
Number |
Grade |
L |
W |
T |
Condition |
| 16RE484820 |
16 |
0.75 |
0.75 |
0.32 |
Machined |
| RE100404 |
18 |
0.160 |
0.055 |
0.055 |
Machined |
| RE2812816 |
18 |
2.00 |
2.00 |
0.25 |
Die-Pressed,
As Sintered |
| RE2812824 |
18 |
2.00 |
2.00 |
0.38 |
Die-Pressed,
As Sintered |
| RE2812832 |
18 |
2.00 |
2.00 |
0.50 |
Die-Pressed,
As Sintered |
| RE315134W |
18 |
2.04 |
0.53 |
0.80 |
Die-Pressed,
As Sintered |
| RE12832128 |
18 |
2.04 |
0.58 |
2.15 |
Die-Pressed,
As Sintered |
| 22RE2812732 |
22 |
1.98 |
1.98 |
0.50 |
Die-Pressed,
As Sintered |
| 26RE453219 |
26 |
0.70 |
0.50 |
0.30 |
Die-Pressed,
As Sintered |
| 26RE762515 |
26 |
1.18 |
0.39 |
0.24 |
Die-Pressed,
As Sintered |
| 26RE801203 |
26 |
1.250 |
0.190 |
0.056 |
Machined |
| 26RE114033 |
26 |
1.77 |
0.63 |
0.53 |
Die-Pressed,
As Sintered |
| 28RE6744RL |
28 |
2.63 |
1.72 |
5.50 |
Isostatically-Pressed,
As Sintered |
| 26RE1236044 |
26H |
1.93 |
0.95 |
0.69 |
Die-Pressed,
As Sintered |
| 26RE468802 |
26HS |
2.29 |
1.37 |
1.60 |
Die-Pressed,
As Sintered |
| 27HRE7558RL |
27H |
2.95 |
2.28 |
10.00 |
Isostatically-Pressed,
As Sintered |
| 32RE468802 |
32H |
2.29 |
1.37 |
1.60 |
Die-Pressed,
As Sintered |
| 32RE678563 |
32H |
2.58 |
1.30 |
0.98 |
Die-Pressed,
As Sintered |
Tolerances
on "machined" blocks are the greater of
+1.5% of the dimension or +0.015"
on cross sectional dimensions, and +0.005"
on the orientation direction.
Tolerances on "as sintered" die-pressed
blocks are the greater of +3% of the dimension
or +0.045".
Tolerances on "as sintered" isostatically-pressed
blocks are the greater of +5% of the dimension
or +0.125".
|
Other
sizes are available on request, or can be machined
from stock sizes.
Sorted in ascending order of Length, Width, and
then Thickness |
Bonded
SmCo Rectangular Magnets
| Stock
|
| Item
Number |
Grade |
L |
W |
T |
| B15S1282424 |
B15 |
2.000 |
0.375 |
0.375 |
| B15S1283228 |
B15 |
2.000 |
0.500 |
0.437 |
| Tolerances
are the greater of +0.5% of the dimension
or +0.005" on all dimensions. |
Other
sizes are available on request, or can be machined
from stock sizes.
Sorted in ascending order of Length, Width, and
then Thickness. |
|
|
